Accessories

Luxel F 9000 CTF
BAS-SR2040
BAS-SR2025


size: 20 x 40cm
20 x 25cm



Luxel F 9000 CTF
BAS-TR2040
BAS-TR2025


size: 20 x 40cm
20 x 25cm



Luxel F 9000 CTF
BAS-MS2025, BAS-MS2040,
BAS-MS2325, BAS-MS2340,
BAS-MS3543


size: 20 x 25cm 20 x 40cm 23 x 25cm 23 x 40cm 35 x 43cm


Luxel F 9000 CTF
BAS-TR2040
BAS-TR2025


size: 20 x 40cm
20 x 25cm




IP Cassette
Luxel F 9000 CTF
size: 20 x 40cm
20 x 25cm
23 x 40cm
23 x 25cm
40 x 43cm




FLA-5100 Accessories
Luxel F 9000 CTF
FLUOR Stage, IP Stage, MULTI Stage
From left to right:

FLUOR Stage
(with optional gel stopper) A glass plate of 40x46cm can be used for fluorescence detection, digitizing function and chemiluminescence detection.

IP Stage
A magnetic stage holds the IP with a soft ferrite layer of any size up 40x46cm.

MULTI Stage
(with optional microtiter plate holder which can hold up to six microtiter plates) Large size polyacrylamide gel plate can be measured with the glass.

Luxel F 9000 CTF
BAS-MS 3543

High sensitivity and waterproof MS type IP appeared in 350x430mm size. Corresponding IP cassette is 400x430mm in size, and is the size which two 200x400mm IP can be exposed simultaneously.




FLA-8000 Accessories
Luxel F 9000 CTF
Slide Carrier

Up to 5 glass slides can be set. Allowance for the size of the slide is very widely designed. Focusing of the optics is set on the surface of the glass slide. By setting the software at Slide mode, 5 slides can be imaged for all the wavelength equipped in the FLA-8000 by one click.


Luxel F 9000 CTF
Gel Carrier

Up to 2 mini-gel (51x59mm) can be set. For example, agarose gel for checking the PCR products before hybridization can be applied. Focusing of the optics is set at 1 mm above the glass platen. By setting the software to Gel mode, 2 gels can be imaged at 100 um pixel size.


Luxel F 9000 CTF
IP Carrier

A special size (85x127mm) imaging plate was prepared for FLA-8000, namely BAS-SR0813. IP carrier is a magnetic plate to stick the IP, which has soft ferrite layer. As the sensitivity of FLA-8000 is designed to be higher at Green-Red regions, the blue (390nm) photostimulated luminescence of IP detection is lower than other FLA systems or BAS systems.



FLA-7000 Accessories
PMT 1 (Bi-Alkali)
PMT 2 (Multi-Alkali)
473nm Laser
532nm Laser
635nm Laser
670nm Laser
Y520 Filter
O580 Filter
R670 Filter
R710 Filter
B390 Filter (for IP)
IP Stage
FLUOR stage (with Fluorescent Board)
Membrane weight


CTF
Luminescence, Fluorescence, Gel documentation
Fluorenscence, Radioisotope
Radioisotope
Accessories
Get Adobe Reader

PDF dökümanları görüntülemek için Adobe® Reader® gereklidir..

Sayfa Başına Git